{ "id": "wall-wine-rack-with-glass-holder", "sku": "wall-wine-rack-with-glass-holder", "title": "Wall Wine Rack with Glass Holder", "slug": "wall-wine-rack-with-glass-holder", "price": 97.99, "currency": "USD", "availability": "in_stock", "category": "wall-mounted-wine-racks", "category_label": "Wall Mounted Wine Racks", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "4.54 kg", "images": [ "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/main-wall-wine-rack-with-glass-holder.jpg", "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-2.jpg", "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-3.jpg", "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-4.jpg", "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-5.jpg", "https://americanwinerack.co/dropship-images/wall-mounted-wine-racks/wall-wine-rack-with-glass-holder/wall-wine-rack-with-glass-holder-6.jpg" ], "description_short": "Two engineered wood shelves hold up to 12 bottles while the metal stemware rails hang glasses upside down, so your counter, cupboard and pantry all get their space back.", "description": "The problem with storing wine on the floor\n\nWine spreads. It starts with a couple of bottles near the kettle, then a box under the dining table, then a shelf in the pantry that was meant for tinned tomatoes. Meanwhile the wine glasses are taking up their own cupboard, stacked at awkward angles where they chip, and they collect dust in the bowl whenever you go a few weeks without a dinner party.\n\nFloor-standing racks solve part of this and create a different issue. They eat into walking space, they get kicked, and in a small kitchen or an apartment there often is not a spare square meter to give away.\n\nA wall mounted wine rack takes the whole problem vertical. The wall above a sideboard, the strip beside a pantry door, the blank panel at the end of a counter: these are spaces you are already paying rent or mortgage on and not using. Putting bottles and glasses there clears your counter, frees a cupboard, and gives you a tidier kitchen without moving anything else around.\n\nHow this rack works\n\nThis one is a single unit that does two jobs. Two engineered wood shelves sit in a painted metal frame and hold up to 12 bottles lying horizontally. Underneath, metal rails hang your stemware by the foot of the glass, bowl down.\n\nThe combination matters more than it sounds. When bottles and glasses live in the same place, pouring a drink stops being a two-cupboard operation. You reach up, take a bottle, take a glass, done. It also looks deliberate. A row of labels with glasses hanging below reads as a small home bar rather than as storage.\n\nThe dimensions are 80.5 cm wide, 49 cm deep in the packed measurement and 20 cm high on the wall, with the imperial figures listed as 31.5 inches wide by 16.93 inches high by 7.87 inches deep. The important number for most people is that shallow depth. At under 8 inches off the wall it does not jut into a walkway, which is why it works in hallways and narrow kitchens where a floor rack would be a nuisance.\n\nMaterial is metal and engineered wood. The metal gives it the strength, the timber shelves give it warmth, and the brown vintage finish means it does not clash with either a modern kitchen or an older house. It is not extendable, so decide your capacity at purchase. If 12 bottles is not enough long-term, plan the wall so a second unit can go above or beside it later.\n\nWho it suits\n\nAnyone with a dozen bottles and nowhere sensible to put them. That covers a lot of households.\n\nIt is particularly good for small homes. If you have been searching for a wine rack for small spaces, the appeal here is that it uses wall rather than floor. Apartments, units, granny flats and share houses all benefit.\n\nIt also suits people who entertain in the room where the wine lives. Having a wine glass holder within arm's reach of the bottles changes how you host. You are not crouching into a bottom cupboard while guests wait.\n\nSmall hospitality venues use these too. Cafes, small bars, offices with a Friday drinks cabinet and guest houses all get a display and storage unit in one. If you are fitting it out commercially, the fixings deserve more attention than usual because the rack will be loaded and unloaded far more often than in a home.\n\nFinally, it is a safe gift. Wine lovers accumulate bottles faster than storage, and the neutral brown finish means you are not guessing someone's color scheme.\n\nHow to choose and where to put it\n\nStart with the wall, not the rack. Measure the clear space you have, then subtract a bit. You want room either side so the end bottles are not jammed against a door frame, and you want clearance below the glasses so nothing swings into a tap or a counter edge.\n\nThink about what is nearby. Heat is the enemy of wine, so keep the rack away from the stove, the oven, the dishwasher vent and the fridge compressor. Direct sunlight through a window is the other thing to avoid, since light degrades wine over time and fades labels. A shaded interior wall is better than a sunny one even if the sunny one looks nicer.\n\nCheck door swings. The most common regret with a hanging wine glass rack is mounting it where a cupboard door or a pantry door clips the glasses. Open everything in the room and watch the arc before you mark a hole.\n\nThen think about fixings, which is the part most people rush. Twelve bottles plus a set of glasses is a real load, and that load hangs off whatever you put in the wall. Fixing into timber studs is the most dependable option on a drywall wall. If there is no stud where you need one, use heavy-duty anchors rated well above the loaded weight. On brick or masonry, use proper masonry plugs and a hammer drill. If any of that sounds like someone else's job, it costs very little to have a handyperson mount it properly, and it is cheaper than replacing a case of wine.\n\nAssembly itself is simple. The rack arrives flat with instructions and tools included. Build the frame and shelves on the floor first, then lift the finished unit to the wall. A second person holding it level while you mark the holes saves a lot of frustration.\n\nLoading and living with it\n\nLoad from the bottom up and keep the heaviest bottles on the lower shelf. It keeps the center of gravity low and makes the whole thing feel steadier when you pull a bottle out.\n\nLay bottles with labels facing out. You will actually find what you want instead of rotating six bottles. For cork-sealed wine, horizontal storage keeps the cork in contact with the liquid so it does not dry and shrink. Screw caps do not care, but there is no harm in storing them the same way.\n\nHang glasses with a little space between them. They should be able to move slightly without touching the neighbor. Store them bowl down and dust stays off the inside, which is the main reason this beats a cupboard shelf.\n\nDo not treat it as a long-term cellar. A rack on an interior kitchen wall is for the wine you plan to drink this month or this season. Anything you are genuinely ageing wants a cool, dark, stable spot.\n\nCare\n\nCare is minimal. Wipe the shelves and frame with a dry or barely damp cloth and dry it straight away, since engineered wood does not like sitting wet. Skip bleach and abrasive scourers on the painted metal, because once the paint chips you have created a spot that can mark.\n\nWash glasses properly before hanging them so you are not drying water spots onto the rims. Lift bottles out rather than dragging them across the shelf, which protects the finish over the years.\n\nEvery few months, give the wall fixings a quick check and re-tighten anything that has worked loose. It takes two minutes and it is the only real maintenance this thing asks for.\n\nThe short version\n\nA wall wine rack with glass holder is the simplest fix for a wine collection that has outgrown the counter. This one holds 12 bottles on two engineered wood shelves with metal stemware rails beneath, measures 80.5 cm wide by 20 cm high, and sits under 8 inches off the wall so it stays out of the way.\n\nMeasure your space, pick a spot away from heat and sunlight, use fixings rated for the full loaded weight, and build it on the floor before you lift it. Do that and you get a cleaner counter, a free cupboard and a small wine display that looks like you meant it.", "llm_summary": "The NEYCIL WMWR-01 is a wall mounted wine rack with an integrated wine glass holder. It is made from metal and engineered wood in a brown vintage style, with a rectangular shape and two shelves. Listed bottle capacity is 12. Product dimensions are 80.5 cm wide, 49 cm deep and 20 cm high, also stated as 31.5 inches wide by 16.93 inches high by 7.87 inches deep, with an item depth of 7.87 inches. Listed item weight is 10 pounds and shipping weight is 4.54 kg. It is not extendable. Assembly is required and instructions are included. Country of origin is not specified in this record; the country of publication is listed as China.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; state consumer protection law and implied warranties for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Wine Rack Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://americanwinerack.co/wall-wine-rack-with-glass-holder/", "canonical_url": "https://americanwinerack.co/wall-wine-rack-with-glass-holder/", "json_url": "https://americanwinerack.co/api/products/wall-wine-rack-with-glass-holder.json", "updated_at": "2026-10-10" }